長城RDX高溫潤滑脂
1． 概述
本產品系以有機高分子稠化劑稠化合成油，并加有多種功能添加劑經適當加工工藝而成的高溫潤滑脂。
2． 性能特點
l 優異的高低溫性能，保證使用部位高溫下正常運轉；
l 良好的潤滑性，保護使用部位減少磨損；
l 優異的機械安定性能和膠體安定性，避免潤滑脂流失；
l 優異的氧化安定性能性能，防止潤滑脂高溫變質；
l 優異的防護性，保證使用部位的金屬部件免受外界的侵蝕。
3． 執行標準
本產品符合NO.065-98標準。
4． 典型數據
|
項 目
|
典型數據
|
試驗方法
|
|
1/4工作錐入度,0.1mm
|
68
|
GB/T 269
|
|
滴點，℃
|
>300
|
GB/T
3498
|
|
腐蝕(T3銅片,100℃,3h)
|
合格
|
SH/T 0331
|
|
蒸發度(200℃,1h),％(m/m)
|
0.22
|
SH/T
0337
|
|
壓力分油，%(m/m)
|
8.37
|
GB/T 392
|
5． 用 途
本產品適用于各種工業裝置和設備高溫下工作的低速和中速重負荷滑動和滾動軸承、鏈條、齒輪的潤滑。
適用溫度范圍：-40℃～+250℃,短期可達280～300℃。
6． 注意事項
l 使用前，將潤滑部位用煤油或其它溶劑清洗干凈，晾干或吹干后再加注本產品；
l 啟用后，應及時將蓋封嚴，以防混入雜質；
l 請勿與其它油脂混用，以免影響使用效果；
l 本產品在230℃以上使用時，應保持良好的通風環境，并且人員不得在此環境下逗留；
l 本產品應貯存于清潔、干燥及避光處。
7． 包 裝
1kg/塑料盒或根據客戶需求進行包裝。
Aeroshell Fluid 41殼牌41號航空液壓油MIL-PRF-5606H CML02-001 12X1QT/CTN
eroShell Fluid 41 is dyed red.
Main Applications
AeroShell Fluid 41 is intended as an hydraulic fluid in all modern aircraft applications requiring a mineral hydraulic fluid. AeroShell Fluid 41 is particularly recommended where use of a "superclean" fluid can contribute to improvements in component reliability, and can be used in aircraft systems operating unpressurised between –54°C to 90°C and pressurised between –54°C to 135°C.
AeroShell Fluid 41 should be used in systems with synthetic rubber components and must not be used in systems incorporating natural rubber.
AeroShell Fluid 41 is compatible with AeroShell Fluids 4, 31, 51, 61 and 71 and SSF/LGF.
Chlorinated solvents should not be used for cleaning hydraulic components which use AeroShell Fluid 41. The residual solvent contaminates the hydraulic fluid and may lead to corrosion.
Specifications, Approvals & Recommendations
Approved MIL-PRF-5606H* (both U.S. and European production)
Approved DEF STAN 91-48 Grade Superclean* (European production only)
Meets DEF STAN 91-48 Grade Normal (European production only) Equivalent to DEF STAN 91-48 Grades Superclean* & Normal (U.S. production only)
Approved DCSEA 415/A (French)
Analogue to AMG-10 (Russian)
NATO Code H-515* (equivalent H-520)
Joint Service Designation OM-15* (equivalent OM-18)
For a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk, or the OEM Approvals website.
Health, Safety & Environment
Health and Safety
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from http://www.epc.shell.com/
|
